Birmingham WSG1640AHD, Руководство по эксплуатации

Страница: 34 / 85

Operating Manual
26
and left by right hand (about 15-20 degrees), if this can’t make the table
move right and left, reset C at other position and try again, by this way,
you can find the right position for C.
ATTENTION: be care for not clamping fingers by dogs and control
arm.
5) Then fix C well on S and tighten it.
NOTE: IF THE TABLE MOVEMENT IS NOT SMOOTHLY, MAY BE
THE OIL PIPE HAVE AIR, MAKE THE TABLE MOVE ON HIGH
SPEED FOR A MOMENT, THE AIR WILL GET OUT THE PIPE.
3.
Table cross movement
a) Rapid movement
Table cross rapid movement: Rotate the pushbutton SA2 to”
”
“MANUAL” position, depress the pushbutton SB9, the table will move
rapidly to front, depress the pushbutton SB8, the table will move rapidly
to behind.
b)
Table cross auto feed
Rotate the pushbutton SA2 to” “AUTO” position, depress SB8 or
SB9, the table will move automatically intermittent to frond or to behind,
Rotate clockwise VR, intermittent feed for saddle transverse can be shift
variably. Cross intermittent feed start and stop point can be set by
distance setting block located on the right side of saddle.