1
Original Instructions
Rev. 6/11/2015
3
DIE GRINDER INSTRUCTIONS MANUAL
18,000 MAX RPM 1/4 in Collet 0.33 HP, 18,000 MAX RPM 1/4 in Collet 0.33 HP - Extended
25,000 MAX RPM 1/4 in Collet 0.33 HP, 25,000 MAX RPM 1/4 in Collet 0.33 HP - Extended
Important Safety Information
Please read, understand and follow all safety information contained in these instructions prior to the use of this tool.
Retain these instructions for future reference.
Intended Use
This pneumatic tool is intended for use in industrial locations, and used only by skilled, trained professionals in accordance with the instructions in this manual.
This pneumatic tool is designed to be used with a disc pad and abrasive disc or other shaft mounted abrasive product for modifying metals, wood, stone, plastics
and other materials. It should only be used for such applications and within its marked capacity and ratings. Only accessories specifically recommended by 3M
should be used with this tool. Use in any other manner or with other accessories could lead to unsafe operating conditions.
Do not operate tool in water or in an excessively wet application.
Do not use abrasive products that have a Max RPM less than the RPM rating marked on the tool.
Tools shall be inspected periodically to verify that ratings, markings, and labels are legible. Contact 3M Company to obtain replacement labels.
Summary of device labels containing safety information
Marking
Description
WARNING: Refer to Instruction Manual
WARNING: Wear eye protection
WARNING: Wear hearing protection
WARNING: AVOID PROLONGED EXPOSURE TO VIBRATION
Direction of Rotation
90 PSIG / 6.2 BAR MAX
Maximum Pneumatic Inlet Pressure
18,000 r/min., 25,000 r/min.
Maximum Rotational Speed
Use accessories rated at tool RPM or higher
Accessories Safety Note
Prolonged vibration may cause injury
Vibration Safety Note
Explanation of Signal Word Consequences
WARNING:
Indicates a potentially hazardous situation which, if not avoided, may result in death or serious injury and/or property damage.
CAUTION:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury and/or property damage.
WARNING!
Read the Material Safety
Data Sheets (MSDS)
before using any materials.
Contact the suppliers of the
workpiece materials and
abrasive materials for copies
of the MSDS if one is not
readily available.
Exposure to DUST generated from
workpiece and/or abrasive materials
can result in lung damage and/or other
physical injury.
Use dust capture or local exhaust as
stated in the MSDS. Wear government-
approved respiratory protection and eye
and skin protection.
Failure to follow this warning can
result in serious lung damage and/or
physical injury.
MSDS
