Bionet SpiroCare, Руководство по эксплуатации, Страница: 56 / 135

56/135
SCOMBA-1.1
SpiroCare Operation Manual
(5)
The test can be conducted in the same way as FVC by selecting “FVC+” menu.
(6)
The parameters and graphs of pre-administration (Base) and post-administration (Post)
can be compared if the results of measurement are printed.
(7) You can see “FVC+” displayed on the data list menu if you press the “Exit” button and
save the data. “FVC+” displays the saved data showing the results of the test
conducted twice, before and after the administratrion of medicine.
Note
-
If test needs to be performed twice, i.e. before and after medication, set up as
[ Setup

SPIRO

FVC Post

On ] before use.
-
Select the Patient Information Entry mode followed by the “New” button in the
Patient Information Entry window to go back to the initial test screen if you want to
test a new patient with “FVC(p)” displayed on the main screen of the Spirometer. At
this time, the previous patient information can be initialized only if you select “New”
from “Patient Information” and enter the patient information.