Bionet SpiroCare, Руководство по эксплуатации

Страница: 39 / 135

39/135
SCOMBA-1.1
SpiroCare Operation Manual
〈 Patient Information Selection Mode 〉
To activate the Information Input mode, locate the shaded block in the desired “Patient
Information” area and press the rotary key. The information can be entered by using the
rotary key or touching the desired area. The Entry Mode consists of the Keyboard mode,
which enables the input of both characters and numbers, and the Key Pad mode, which
enables the input of numbers only. The Key Pad Entry mode appears if no alphanumeric
characters need to be fed into the Information Entry section.
Entering ID
Enter ID value used in the hospital to classify examination result. You can enter a value
made from a combination of up to 20 letters and numbers by using the rotary key or the
touchscreen. If you select “ID”, letter entry space that consists of alphabet and numbers
appears on the screen.
If you turn the rotary key to the right, cursor moves consecutively from left top to right
bottom. Letters or numbers on which the cursor is placed are highlighted on the screen. If
you press the rotary key or touch here, the selected letters or numbers are entered. If you
place “OK” on the cursor and press the rotary key after completing entry, the ID numbers
entered in advance are saved and the letter entry space disappears from the screen. If
you turn the rotary key to the right, the cursor moves to “Name” entry space.
NOTE
-
When entering an ID, it is impossible to enter special characters such as “, <, >, ?, /,
*, |, :, \, etc. (these invalid characters are set to be inactive)
-
When entering an ID, an English keyboard will be displayed, regardless of whether
there is a multi-language set-up.
-
When entering an ID by connecting to an external keyboard, proceed by using
general alphabet and numbers only. If you enter an ID using Latin extended
characters and Russian, an error may occur when transferring files via PC and USB.