Bionet SpiroCare, Руководство по эксплуатации

Страница: 126 / 135

126/135
SCOMBA-1.1
SpiroCare Operation Manual
10
There is no Access
Point. Please
check the AP
There is no wireless
access point detected.
Check AP and retry
11
Fail, connecting.
Do you want to
retry?
When wireless AP
connection is failed - Press Retry button
- Retry after checking AP
12 Ping : Failed
When there is
connecting failure
between network and
PC with BMS Server
- Check System setup and
network
- Check PC network setup
-Check LAN cable or wireless
environment
13
Verify : C-Echo
Failed
When there is failure
between PACS Server
PC and network
- Check system setup and
network
- Check PC network setup
-Check LAN cable or wireless
environment
-Please check PACS programs are
working
14
IP address
conflict.
The devices IP address is
already in use on the
network
Please contact ‘Network Team’ to
check IP address, and set right IP
in turn of System setup and
Network
15
Connection Error.
Check lan cable,
network setting
and relevant
program.
When there is failure of
network connection
Please check LAN cable
connection, network setting,
server PC’s networking and
related S/W programs
16 File Trans Fail!!
When file transmission to
server PC or USB memory
fails
Check server PC’s networking
conditions, and USB memory, and
retry
17
Check Worklist
Server IP
When server IP of PACS
worklist is not input
Input server IP of PACS worklist in
turn of System setup, Network and
PACS setting
18
Check Device AE
Title
When AE Title of device is
not input
Input AE title of device in turn of
System setup, Network and PACS
setting
19
Check Device
Port When port of device is
not input
Input port of device in turn of
System setup, Network and PACS
setting
20
Check Worklist
Server Port
When server port of PACS
Worklist server is not input
Input server port of PACS Worklist
server in turn of System setup,
Network and PACS setting
21
Check Store AE
Title
AE title of PACS store
server is not input
Input AE title of PACS store server
in turn of System setup, Network
and PACS setting