2
3
PLEASE READ AND SAVE THESE IMPORTANT
INSTRUCTIONS
When using electrical appliances, basic safety precautions should always
be taken including the following:
1. Before connecting the heater, check that the voltage indicated on the
rating plate corresponds to the main voltage in your home/office.
2.
WARNING:
In order to avoid overheating, do not cover the heater
( ) (symbol found on top of heater).
3.
DO NOT
position the heater directly under a power socket.
4.
DO NOT
use this heater in the immediate surroundings of a bath,
a shower or a swimming pool.
5. If the supply cord or plug is damaged, it must be replaced by the
manufacturer or its service agent or similarly qualified person in order
to avoid hazard. The heater contains no user serviceable parts.
Should the product suffer damage or breakdown, it must be returned
to the manufacturer or their service agent.
6. Under the environment with electrical fast transient, the product
may malfunction and require user to reset the product.
7.
DO NOT
use this heater with a programmer, timer or any other
device that switches the heater on automatically, since a fire
risk exists if the heater is covered or positioned incorrectly.
8. Only touch the heater with dry hands.
9.
DO NOT
use this heater outdoors.
10.
DO NOT
position where it can be touched by children, especially
the very young.
11. Allow a safe area around the heater away from furniture or
other objects; at least 50 cm from the top and sides and 200 cm
at the front.
12.
DO NOT
use this heater when it is lying on its side.
13.
DO NOT
use the heater in rooms with explosive gas (e.g. petrol) or
while using inflammable glue or solvent (e.g. when gluing or
varnishing parquet floors, PVC etc.)
14.
DO NOT
insert any objects into the heater.
15. Keep the mains cord at a safe distance from the main body of the
heater.
16. If overheating should occur, the built-in overheating safety
device will switch off the heater.
17.
DO NOT
place the cord under a rug.
18. The heater is to be installed so that switches and other controls
cannot be touched by a person in the bath.
19. Heater must be installed at least 10cm above the floor when wall
mounted.
20. The heater cannot be used adjacent to curtains or combustible
material. Curtains or combustible material may be burned if the
heater was installed incorrectly.
21.This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised
to ensure that they do not play with the appliance.
22.
WARNING:
Risk of Fire. Discontinue use if the outlet or plug become
hot to the touch. Overheating may indicate a worn or damaged
outlet. Consult a qualified electrician for outlet replacement.
23.
CAUTION:
In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be supplied
through an external switching device, such as a timer, or connected
to a circuit that is regularly switched on and off by the utility.
U.K. and IRELAND
RETAIN THE FOLLOWING FOR FUTURE REFERENCE.
DESCRIPTIONS (See Fig.1-6)
A. LCD Display
B. Power Light
C. Glass Panel
D. Heat Vent
E. Removable Stand
F. Mounting Brackets (2)
G. Control Panel
H. Handle
I. Light Bulbs (2)
J. Cord Wrap
K. Main On/Off (I/O) Switch
L. Power Button
M. Thermostat Button
N. Timer Button
O. Flame Brightness Button
P. Sound Button
Q. Fahrenheit/Celsius Button (only Fig.2)
R. Machine Screws (4)
ASSEMBLY INSTRUCTIONS (see Fig. 1 - 6)
Carefully remove all parts and make sure that they are all
present. Ref. to Figs.1-6.
Installing Batteries into the Remote:
Before operation, insert 2 “AAA” batteries (not supplied) into the back
of the remote control:
• DO NOT mix old and new batteries
• DO NOT mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries
The remote control for this unit has the capability of operating all
control panel functions. Please note this remote will not work
through walls (See Fig.3 L-P).
Bulb Installation (See Fig.1):
Unwrap the (2) 25W Bulbs from foam packaging material and open
doors on back of unit (I) with a crosshead screwdriver.
Stand Assembly (See Fig.6):
For floor use attach the stand (E) to the fireplace heater using the 4
machine screws (R) (provided). Gently lay the unit on the floor and
attach the stand (E) to the bottom. For wall mounting see Wall Mount
Installation below.
Wall Mount Installation (See Fig. 4 & 5):
This product weighs 11.5 kg. Do not install alone.
Mounting guide with instructions is attached below to make
mounting your fireplace heater easy. 2x Mounting brackets (F) provided.
Seek professional assistance for screws and fixtures.
Note: The wall mounting guide is not to scale.
IMPORTANT:
Before drilling into any wall ensure no electrical cables
are present in the area.
Make sure you allow at least 1m of space on
all four sides of unit.
1. Remove stand (E) from main unit, if installed.
2. Secure the mounting brackets (F) to the wall using the wall
mounting guide provided (see Fig. 4).
3. Hang main body on mounting brackets by lifting over the
brackets and sliding down.
4. Use cord wrap (J) to hide extra cord.
BEF5000-I_IB.qxd:Layout 2 7/10/08 12:35 PM Page 2
All manuals and user guides at all-guides.com