Biolase Waterlase iPlus, Руководство пользователя

Страница: 48 / 82

11
Maintenance and Troubleshooting
DAILY MAINTENANCE
Use the display covers supplied with the system to cover/protect the screen console. Use disinfectant to
wipe down the front of the laser and the Handpiece holder after each procedure. Do not use bleach or
abrasive cleaners.
Single-use Tips must be discarded after one use in a medical waste Sharps container.
MIRROR CHECK AND CLEANING
NOTE: If the performance of the delivery system is questionable,
but the Tip is in good condition, check the mirror for damage or
contamination.
WARNING: Use of a contaminated or damaged mirror will cause
damage of the Fiber Delivery System.
NOTE: If the plastic Tip ferrule is continuously getting damaged
at the input end, the mirror should be checked and cleaned, and
mirror alignment should be checked.
48
Waterlase iPlus User Manual
Set the system in Standby mode, navigate to the illumination screen (Fig 8.10), and remove the Tip.
MIRROR INSPECTION AND CLEANING
Point the Handpiece towards a white surface. The visible spot of the aiming beam should be clear,
uniform, and well-confined. If dark areas and irregularities are present, inspect the mirror (Applies to
both Turbo and Gold Handpieces).
CAUTION : DO NOT allow water to enter the Laser Console,
especially where the Fiber Optic Cable and Handpiece connect;
any water entering the portals of the exhaust ring may damage
the fiber optics inside the Handpiece.