Biolase Waterlase iPlus, Руководство пользователя

Страница: 67 / 82

67
Appendix D
Tip Inspection
TIP CLEANING INSTRUCTIONS
1. Hold Tip with tweezers.
2. Moisten cotton swab with 100% isopropyl alcohol drops.
3. Push Tip into cotton swab.
4. Twirl cotton swab while maintaining pressure on Tip. (Fig. D.1)
TURBO TIP INSPECTION
FIBER TIP INSPECTION
NOTE:
Prior to each use always check the distal end of the Tip
for damage or contamination. Check both ends of the Tip when
replacing.
WARNING:
Use of damaged or contaminated Tip may cause
damage to the Fiber Cable and will compromise clinical
performance of the Waterlase iPlus. Tips can be inspected using
magnifying lenses, a microscope, laser aiming beam, or the
BIOLASE Tip Inspection Kit.
Fig D.1
Fig D.2
Fig D.3
Waterlase iPlus User Manual
1. Before using the Tip, inspect Tip surfaces for any damage or debris using
loupes or a magnifier. Clean or replace as required.
2. Prior to insertion of the Tip, inspect the o-rings for any damage or debris.
Replace damaged o-rings; if it is suspected that part of the o-ring still
remains inside the Handpiece, blow dry, clean air through the Handpiece
1. Check that both ends of the Tip appear flat and present a mirror-like
reflection of any light source.
Look for chips or nicks along the edges (Fig D.2).
2. Prior to insertion of the Tip, inspect the o-rings for any damage or
debris. Replace damaged o-rings; if it is suspected that part of the o-ring
still remains inside the Handpiece, blow dry, clean air through the
Handpiece