Biolase Waterlase iPlus, Руководство пользователя

Страница: 22 / 82

6
Safety with the Waterlase
22
Waterlase iPlus User Manual
7. Move the circuit breaker to the OFF ( O ) position (located on the rear panel) and remove the key
before leaving the laser console unattended.
8. All operatory entrances must be marked with an approved warning sign (provided) indicating a
laser is in use.
9. Take special care to contain the laser plume (particles produced by the vaporization of virally or
bacterially infected tissue during procedures utilizing the laser and minimal or no water spray);
ensure that all appropriate protective equipment (including high-speed suction to remove the
plume, appropriate masks, and other protective equipment) is used at all times during the
procedure.
DANGER: DO NOT open system side doors. These are to be
used by authorized service personnel only. Danger from radiation
exposure and high voltage may exist.
NOTE:
Please direct any safety questions to the local BIOLASE
representative, or call BIOLASE at
(888) 424-6527
, or BIOLASE
Service at
(800) 321-6717 (US only).
SAFETY CLASSIFICATION
The following safety classifications are applicable to this device:
• Laser Radiation - Class 4
• Aiming Beam - Class 1
• Type of protection against electrical shock - Type BF Applied Part: Laser Handpiece
• Not protected against water ingress - Ordinary Equipment
• Main Laser Console - IPX0
• Footswitch - IPX8
• Not suitable for use in the presence of flammable anesthetic
• Not suitable for use in oxygen-rich environments
• Operation Mode - Non-continuous with duty cycle of max 2 minutes ON, min 30 seconds OFF at
maximum power output
CAUTION:
High temperatures produced in the normal use of this
laser equipment may ignite some materials (e.g., cotton wool
when saturated with oxygen); solvents of adhesive and
flammable solutions used for cleaning and disinfecting should be
allowed to evaporate before the laser equipment is used.