manualshive.com logo in svg

BIO RAD PTC-0240, Руководство по эксплуатации

Поделиться
Скачать
BIO RAD PTC-0240 Скачать руководство пользователя страница 104

Using the Utilities

Tech Support: 1-800-4BIORAD • 1-800-424-6723 • www.bio-rad.com   

8-7

•

Select <Update>.

•

A confirmation screen will appear asking you to confirm your desire to update the
software. Select <Yes> to proceed with the update. 

•

A confirmation screen will advise that the update has been completed. If any
errors occurred during the update, select <Log> to view the error log. If the
update was successfully completed, restart the DNA Engine Tetrad 2 cycler.

•

Select <About> from the <Utilities> menu to view the currently loaded software
version and confirm that the software update has been successfully completed.

Bio-Rad also offers a Software Update Utility Kit which allows users to update the
software of any DNA Engine line thermal cycler (including the DNA Engine Tetrad 2)
using a serial cable and a Windows-based PC. This kit is available free-of-charge
from Bio-Rad. Request item number: SWU-0200.

<Gradient Calc>

The Gradient Calculator allows you to view the temperature of any well or column in the
sample block. As discussed in Chapter 5, the thermal gradient option is only available
when using 96-well blocks.

Transferring Program Files

During the initial boot-up sequence of the DNA Engine Tetrad 2 cycler (see the
“Turning the DNA Engine Tetrad 2 Cycler On” section in Chapter 4), several options
are available for transferring program files. Options 

2 Send Files

and 

3 Receive Files

can be used to transfer all program files in all folders on one DNA Engine Tetrad 2
cycler to another DNA Engine Tetrad 2 cycler. 

To perform a file transfer from one DNA Engine Tetrad 2 cycler to another:

1. Use a standard RS-232 null-modem cable to connect the DNA Engine Tetrad 2

cyclers via their RS-232 ports.

Содержание PTC-0240





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды