Binder MK 115 Скачать руководство пользователя

Страница: 8 / 159

MK / MKT (E5) 03/2019

page 8/158

Prohibition signs

Do NOT touch

Do NOT spray with

water

Do NOT climb

Information

to be observed in order to ensure optimum function of the product.

1.2.4 Word message panel structure

Type / cause of hazard.

Possible consequences.

∅

Instruction how to avoid the hazard: prohibition.



Instruction how to avoid the hazard: mandatory action.

Observe all other notes and information not necessarily emphasized in the same way, in order to avoid
disruptions that could result in direct or indirect injury or property damage.

1.3

Localization / position of safety labels on the chamber

The following labels are located on the chamber:

Pictograms (Warning signs)

Hot surface (on chamber door)

Cold surface (on chamber door)

Electrical hazard
(chamber with voltage and fre-
quency changer: on the voltage
and frequency changer)

Service label

Figure 1: Position of labels on the chamber

Keep safety labels complete and legible.

Replace safety labels that are no longer legible. Contact BINDER service for these replacements.

Содержание MK 115
































































































































































Результаты поиска

Содержание MK 115

Отзывы:

Похожие инструкции для MK 115

Бренды по названию

Популярные бренды

Binder MK 115, Руководство по эксплуатации

Результаты поиска

Содержание MK 115

Отзывы:

Похожие инструкции для MK 115

Бренды по названию

Популярные бренды