Binder MK 115, Руководство по эксплуатации

Страница: 54 / 159

MK / MKT (E5) 03/2019 page 54/158
“Ramp” and “Step” mode example (representation of a temperature course)
W/°C
t/min.
0
20
40
60
80
100
10 30 40 60 70 100 130
1 2 3 4 5 6 7 8
Corresponding program table
Section No.
Duration
[hh:mm:ss]
Temperature
[°C]
Fan (MK 56)
[%]
Ramp or Step
1 00:10:00 40.0 xxxx Step
2 00:20:00 60.0 xxxx Step
3 00:10:00 80.0 xxxx Step
4 00:20:00 40.0 xxxx Step
5 00:10:00 40.0 xxxx Ramp
6 00:30:00 80.0 xxxx Ramp
7 00:30:00 80.0 xxxx Ramp
8 00:00:01 20.0 xxxx Ramp
9.7.3 Special controller functions via operation lines
You can define the switching state of up to 16 operation lines (control contacts). They are used to activate
/ deactivate special controller functions.
•
Operation line “Idle mode” activates / deactivates the operating mode “Idle mode”.
•
Operation lines „Switching output 1“ up to „4“ can be used to turn on and off any equipment connected
to the zero-voltage switching outputs (DIN sockets (7) and (8) (option, chap. 19).
•
Operation line “Compr. air dryer” serves to activate the compressed air dryer (option, chap. 20.6).
•
Operation line “Compressed air valve” serves to open the solenoid valve of the compressed air con-
nection (for options compressed air connection, chap. 20.5, or compressed air dryer, chap. 20.6)
•
Operation line “Anti-condensation protection” serves to switch the anti-condensation protection (chap.
18).
The other operation lines are without function.