Binder MK 115, Руководство по эксплуатации

Страница: 106 / 159

MK / MKT (E5) 03/2019 page 106/158
20. Options
20.1 APT-COM™ 4 Multi Management Software (option)
The chambers are regularly equipped with an Ethernet interface (5) that can connect the BINDER APT-
COM™ 4 Multi Management Software. The MAC Address is indicated in the “Device info” controller menu
(chap. 14.5.2.2). The actual temperature values are given at adjustable intervals. Programming can be
performed graphically via PC. Up to 100 chambers can be cross-linked. For further information please
refer to the APT-COM™ 4 operating manual.
APT-COM™ 4 Basic Edition is included with the chamber. APT-COM™ 4 is available for download on the
BINDER website. Upon registering the chamber, you will receive a license key with which you can activate
the functionality of the Basic Edition for your downloaded version. For further information see chap. 26.2.
20.2 RS485 interface (option)
With this option, the chamber is equipped with an additional 2-wire RS485 serial interface (5a) that can
connect the BINDER APT-COM™ 4 Multi Management Software. The actual temperature values are giv-
en at adjustable intervals. For further information please refer to the APT-COM™ 4 operating manual.
20.3 Data logger kit (option)
BINDER Data Logger Kits offer an independent long-term measuring system for temperature. They are
equipped with a keyboard and a large LCD display, alarm functions and a real-time function. Measure-
ment data are recorded in the Data Logger and can be read out after the measurement via the RS232
interface of the Data Logger. It offers a programmable measuring interval and permits storing up to 64000
measuring values. Reading out is done with the Data Logger evaluation software. You can give out a
combined alarm and status protocol directly to a serial printer.
Data Logger Kit T 220: Temperature range -90 °C / -130 °F up to +220 °C / 428 °F
For detailed information on installation and operation of the BINDER Data Logger, please refer
to the mounting instructions Art. No. 7001-0204 and to the original user manual of the manu-
facturer, supplied with the data logger.
20.4 Analog outputs for temperature (option)
With this option, the chamber is equipped with analog outputs 4-20 mA for actual value and set-point val-
ue of temperature. These outputs allow transmitting data to external data registration systems or devices.
The connection is realized as a DIN socket (9) in the lateral control panel as follows:
ANALOG OUTPUTS TEMPERATURE 4-20 mA DC
PIN 1: Temperature actual value –
PIN 2: Temperature actual value +
PIN 4: Temperature set-point value –
PIN 5: Temperature set-point value +
MK: Temperature range: -40 °C / -40 °F up to +180 °C / -356 °F
MKT: Temperature range: -70 °C / -94 °F up to +180 °C / -356 °F
A suitable DIN plug is enclosed.
Figure 17: Pin allocation of the DIN socket (9) for option analog outputs