95
The Bigfoot Unity
™
Diabetes Management System User Guide | Chapter 7
6.
The Sensor Applicator is prepared and
ready to Apply the Sensor.
CAUTION:
The Sensor Applicator
now contains a needle. Do NOT touch
inside the Sensor Applicator or put it
back into the Sensor Pack.
7.
Place the Sensor Applicator over the
prepared site and push down firmly
to apply the Sensor to your body.
CAUTION:
Do NOT push down on
the Sensor Applicator until placed over
prepared site to prevent unintended
results or injury.
8.
Gently pull the Sensor Applicator away
from your body. The Sensor should now be
attached to your skin.
Note:
Applying the Sensor may cause
bruising or bleeding. If there is bleeding
that does not stop, remove the Sensor and
contact your health care provider.
9.
Make sure the Sensor is secure after
Application. Put the cap back on the
Sensor Applicator. Discard the used
Sensor Pack and Sensor Applicator
according to local regulations.