41
The Bigfoot Unity
™
Diabetes Management System User Guide | Chapter 5
3.
When you tap
Next
, your Correction Dose Table will be completed
automatically using the Glucose Target and Correction Factor just
entered.
Each row of the new table represents a glucose range. The lower
limit of the first range is your Glucose Target plus your Correction
Factor. The higher limit of the first range is your Glucose Target
plus 2 times your Correction Factor. For each successive row, the
lower limit is derived by adding 1 to the upper limit of the previous
range, and the upper limit is derived by adding your Correction
Factor to upper limit of the previous range. Rows will be added
until the upper range of a row exceeds 400 mg/dL. One additional
insulin unit is added to each row to represent approximately how
much insulin would be needed to bring your current glucose level
down to the lower limit of that range. You can edit this table as
necessary as described in previous sections.
4.
Tap
Next
to continue.
Entering Notes
Enter any Notes that will serve as reminders or tips for taking care
of your diabetes. Notes only appear within the App and not on your
Caps when it is time to dose insulin from your pens. Any Notes you
enter about adjusting the number of insulin units will not be taken into
consideration when viewing insulin information on your Caps.
1.
Decide if you would like to include notes in
your insulin settings.
• If you do not want to enter any Notes,
tap
Skip
to skip this section.
• Notes have a limit of 1000 characters
and 3 images.
