94
The Bigfoot Unity
™
Diabetes Management System User Guide | Chapter 7
4.
Line up the dark mark on the Sensor
Applicator with the dark mark on the
Sensor Pack. On a hard surface, press
firmly down on the Sensor Applicator until
it comes to a stop.
5.
Lift the Sensor Applicator out of the Sensor
Pack.
2.
Wash application site using a plain soap,
dry, and then clean with an alcohol wipe.
This will help remove any oily residue that
may prevent the Sensor from sticking
properly. Allow site to air dry before
proceeding.
Note:
The area
MUST
be clean and dry
following these instructions, or the Sensor
may not stay on for the full 14 day wear
period.
3.
Open the Sensor Pack by peeling the lid
off completely. Unscrew the cap from the
Sensor Applicator and set the cap aside.
CAUTION:
Do NOT use if the
Sensor Pack or the Sensor Applicator
seem to be damaged or already
opened. Do NOT use if past expiration
date.