Beretta SC ACS 160 E, Руководство пользователя

Страница: 23 / 32

23
ENGLISH
STATISTICS (MENU 2)
Menu “2. Statistics” is used for function control and long-
term monitoring of the system.
The Statistics menu contains the functions shown and de-
scribed below.
Operating hours (menu 2.1)
Shows the hours of operation of the main DHW pump.
Operating hours circ. (menu 2.2)
Shows the hours of operation of the circulation pump.
Heat output (menu 2.3)
Displays the system’s heat output in kWh.
b
These values are purely indicative and serve only for a general assessment of system functioning.
Graphic overview (menu 2.4)
Provides a clear overview of “Operating hours” and “Heat output” data in the form of a bar graph. Various time ranges are
available to allow comparison. The two keys on the left can be used to scroll through the data.
Message log (menu 2.5)
Displays the last 10 system events, indicating date and time.
Reset/clear (menu 2.6)
Resets and clears individual statistics. The “All statistics” function clears all information except for error messages.
b
To run analyses on system data, the time must be set correctly in the controller. Remember that the clock will stop
and must be reset if the power supply to the controller is cut off for more than about 24 hours. An unsuitable setting
or a clock error can cause data to be deleted, recorded incorrectly, or overwritten. The manufacturer acknowledges
no liability for recorded data.
DISPLAY MODE (MENU 3)
Menu “3. Display mode” is used to select the appearance
of the controller’s display for normal operation. The defau-
lt display appears if two minutes go by without any key
being pressed. The main menu appears again when a
key is pressed.
Press “esc” or select “Exit display mode” to exit the menu.
Schematic (menu 3.1)
In schematic mode, the various hydraulic systems are
shown along with the measured temperatures and opera-
ting states of the points of use.
Overview (menu 3.2)
In overview mode, the measured temperatures and operating states of the points of use are given in text form.
Alternating (menu 3.3)
In alternating mode, the schematic display and the overview display both appear for 5 seconds at a time.
2.Exit Statistics
OK
2.1.Operating hours DHW
2.2.Operating hours circ.
esc
3.Exit display mode
Info
3.1.Schematic
3.2.Overview
esc