Beretta SC ACS 160 E, Руководство пользователя

Страница: 22 / 32

22
SETUP WIZARD
The first time the controller is switched on, once the lan-
guage and the clock are set, a prompt will appear asking
whether or not the setup wizard is required. The wizard
can be called up again at a later time if needed, from the
special functions menu. The wizard will guide the user
through the basic settings in the correct sequence, pro-
viding a brief description of each parameter displayed.
Pressing “esc” once, the screen returns to the previous
value, so that it is always possible to go back or make
changes. Pressing “esc“ repeatedly, the steps of the se-
lection procedure can be undone one by one, without
confirming the wizard input. Finally, accessing parameter 4.2 and selecting “Manual” mode, the installer can test the
various outputs with the components connected, and verify whether or not the readings from the sensors are reliable. This
done, automatic mode can be re-activated.
b
Observe the indications for individual parameters given on the following pages, and check whether or not further
settings are needed for the particular application.
FREE PROGRAMMING
If the intention is not to use the setup wizard, be sure to observe the following sequence when making the settings:
- Menu 6. Special functions – Time & date
- Menu 5. Settings, all parameters
Finally, accessing parameter 4.2 and selecting “Manual” mode, the installer can test the various outputs with the compo-
nents connected, and verify whether or not the readings from the sensors are reliable. This done, automatic mode can
be re-activated.
b
Observe the indications for individual parameters given on the following pages, and check whether or not further
settings are needed for the particular application.
MEASUREMENTS (MENU 1)
Menu “1. Measurements” displays currently measured
temperatures.
Press “esc” or select “Exit measurements” to exit the
menu.
Press “Info” to view a short message explaining the mea-
surement values.
Press “esc” or select “Overview” to exit the Info menu.
b
If “Error” appears in the display instead of the mea-
surement value, this could mean that a temperatu-
re sensor is faulty or not connected properly. If the
cables are too long or the sensors not positioned
correctly, there could be minor deviations in the
measurement values. In this instance, the values
displayed can be compensated by making adjustments via the controller.
b
The temperature measured is the temperature at the outlet of the heat exchanger, which could differ from that me-
asured at the taps. Small fluctuations in temperature at the taps are compensated generally by mixing water from
the main.
Setup wizard
Yes No
esc
Do you want to run the setup
wizard now?
1.Exit Measurements
Info
1.1.Storage ret. 19°C
1.2.Circulation 39°C
esc
Overview
1.1.Storage ret. 19°C
esc
Temperature of water in storage
return