5
111660 Rev C 5-13-14
The Manager’s Keypad.
See Figure 1.
The manager’s keypad allows the dispenser to be programmed. When
the keypad is plugged into the dispenser receptacle the dispenser
automatically enters the attendant mode (sometimes referred to as
“manager’s mode”). The attendant mode allows access to the
dispenser totals, pricing information and programming information.
The manager keypad is located in the electronics head behind the side
1 door. See page 18 for instructions on how to connect the manager’s
keypad.
See the “How To Prepare The Dispenser For Operation” section for a
complete description of keypad functions for programming the
dispenser. See the “How To Operate The Dispenser” section for an
explanation of keypad use to read totals. See the “How To Use
Diagnostics” section for complete instructions for using the keypad to
read error codes.
7. A magnetic switch (Last Sale Recall) is provided for reading totals and recalling the display
information during a power failure.
8. A second magnetic switch allows the attendant to read daily totals from the pump face. This switch
also gives you access to the Audit Trail.
9. Two battery back-up systems are provided:
A +12 volt DC sealed lead acid battery works in conjunction with the Totals/Display Recall switch to
display the last sale data or pump totals when AC power is interrupted. The battery will allow the
displays to be viewed in 30-second intervals for a total of up to 20 minutes.
A +3.6 volt DC nickel-cadmium battery retains totals and programmed information in the RAM
memory during power failures for up to 10 days.
10. All units have conformal coated electronic boards to help protect them from moisture or foreign
material damage. All major electronic board assemblies are environmentally tested and
temperature cycled.
11. Dispenser programming is performed from the manager’s keypad. The keypad is located Inside the
electronics head behind side 1 electronics door.
12. This series is available with 1 product to 4 products (maximum of 4 hoses - 2 per side).
Features and Capabilities (Cont’d)
Pump Control Devices
Figure 1