38
111660 Rev C 5-13-14
How to Program the Local Preset and Tax Receipt Printer
The Pacific is available with an optional Local Preset
keypad that allows an attendant to preset a money
or volume amount to be dispensed. The dispenser
will stop the flow of fuel and complete the sale at
that preset amount. The Local Preset keypad is an
option to the standard Pacific dispenser (See Figure
17.1). When the Local Preset option is purchased,
customer may choose to also purchase an optional
Tax Receipt Printer. The Tax Receipt Printer is
available as on option ONLY when the Local Preset
option is also purchased.
If the Local Preset option is present without the Tax
Receipt Printer option, no programming is necessary
to enable the keypad.
Programming the Tax Receipt Printer is done with
the use of a standard PC keyboard with a PS2
connector.
Unlock and gently open the electronic enclosure
door.
Plug in the keyboard connector to the PS2
connector on the top of the Local Preset Board. See
Figure 17.2. Gently close the electronic enclosure
door, and engage one of the two locks slightly to
hold the door in place, so that you can see the
display of the Local Preset.
As soon as a PC keyboard is plugged in, the Local
Preset goes into programming mode.
For instructions to program the Tax Receipt Printer,
refer to Manual #
106752
.
Figure 17.2
Backside of Local Preset Board
With PC Keyboard connected
Figure 17.1
Example of Local Preset Keypad when the
optional Tax Receipt Printer is purchased.
If the optional Tax Receipt Printer is not
purchased, the graphic overlay will not
show a “PRINT” key.
The preset amount is
$ 5.00
Press cancel for Fill-up
7
6
8
5
9
4
3
2
1
0
How to Program the Dispenser for Operation