25
111660 Rev C 5-13-14
How to Enter the Type of Dispenser - Number of Sides, Number of Grades,
Number of Hoses, Valve Configuration, Blend Ratio, Blended Octane Err Range
for the Dispenser
Menu Code 7
NOTE:
This Menu Code MUST BE PROGRAMMED FOR ALL DISPENSERS.
To prepare the dispenser for operation, the following
information must be programmed:
1. The number of sides (up to a maximum of 2).
2. The number of Grades (up to a maximum of 4 on each
side of the dispenser).
3. The number of Hoses (up to a maximum of 2 on each
side of the dispenser).
4. If the Dispenser is a Blender, Mixer, or Neither.
0 = Straight
1 = Blender
2 = Mixer
To enter new information, follow this procedure:
NOTE: Access code (Menu 3) must be entered into the
pump and the PPV display must indicate
dashes before this mode may be entered.
1. Press the 7 button and then the
MODE
button on the
keypad. The number 7 appears in the price display
and the number of Sides appear in the main display.
The default setting is for 2 Sides. See Figure 7.1.
To change from a 2 sided dispenser to a one sided
dispenser press the 1 button on the keypad. This
option will only except a 1 or a 2.
2. Press the
ENTER
button to save the new setting.
3. Once
ENTER
has been pressed the number of grades
appears in the main display. The default setting is for
4 grades per side of the dispenser. See Figure 7.2.
To change the setting from 1-4 grades, press either 1,
2, 3 or 4 button on the keypad.
4. Press
the
ENTER
button to save the new setting.
SidES
2
Figure 7.1
COdE
7
GrAdES
4
Figure 7.2
COdE
7
How to Program the Dispenser for Operation