32
111660 Rev C 5-13-14
How To Set A Volume Allocation Limit
Menu Code 11
The dispenser can be programmed to stop the flow of fuel at a volume you determine. The dispenser is
programmed at the factory to stop the flow of fuel at 0999 volume units. This is the maximum volume
limit that can be set for gallons. The maximum limit for liters is 9999 volume units. The minimum volume
limit is 0001 unit.
THE DISPENSER WILL NOT OPERATE IF A ZERO LIMIT IS SET.
NOTE: Some control consoles will overwrite the volume allocation limit.
To set a limit on the volume that can be pumped from the
dispenser for each delivery, follow this procedure:
1. After the Manager’s Mode has been accessed, press
the number 1 and 1, then the
MODE
button on the
keypad. The price display shows the dispenser is in
Menu Code 11.
If the dispenser has not been programmed since it
came from the factory, the number 0999 appears in the
main display. This is the default setting. See Figure
11.1.
2. To change the setting, use the 0 through 9 buttons on
the keypad to enter a new volume allocation limit.
Example: If a volume allocation of 0050 has been set, the
dispenser stops the flow of fuel at 50 volume units.
NOTE: If an error is made, press the
0
button until the
volume display window shows all zeros.
Enter a new number.
3. When the correct volume allocation appears in the
main display, press the
ENTER
button to save the
selection.
4. Press the
CANCEL
button to exit this menu code.
5. If this is a two sided dispenser, changing one side will
automatically change the second side to the same
value as the first.
ALLOC
0999
Figure 11.1
COdE
11
How to Program the Dispenser for Operation