Benelli 2014 BN600, Руководство по обслуживанию

Страница: 52 / 243

CHK
ADJ
- 51 -
ENGINE/ENGINE OIL
ENGINE OIL CHECK
Start:
• the engine and leave it to warm up for a few minutes before
switching it off.
Remove:
• the sump plug
Place:
• a suitable container under the magnetic cap "A" to recover
the engine oil. Fig. A
Remove:
• the magnetic cap "A" (together with the copper gasket).
Drain:
• the engine oil out of the crankcase.
NOTE:
Replace the oil fi lter cartridge if necessary.
Replace:
• the seal on the magnetic cap.
Install:
• the new seal
• the magnetic cap
Tighten the magnetic cap with the following torque:
T.R.
Torque 24 N*m
Fill:
• the crankcase with the recommended engine oil in the
amount specifi ed.
Install:
• the oil cap "B" Fig, B
Start:
• the engine.
leave it to warm up for a few minutes before switching it off.
NOTE:
Always make sure that the level is midway between the MIN and
MAX marks on the dipstick Fig.B.
Top up the engine oil level if needed.
A
A
B
B
MIN
MAX