DIAGNOSTICS
7
51
5) Connect the wiring, reset the fault
code and activate the engine to
check the fault has been eliminated.
Ok
Activity Performed - end the test
The fault remains
Contact Benelli after-sales assistance
TEST
1) Check the integrity of the terminal
and the cable:
- pin ECM 2/A2
Ok
Disconnect the fuel pump and proceed with
test 2.
Faulty
Repair the fault, proceed with test 5
2) Check the cable for short circuit
- pin 2/A2 of ECM to the mass
Ok
Proceed with test 3
Short circuit
Locate and repair the wiring fault, proceed
with test 5
Locate and repair the cables fault, proceed
with test 5
4) Check the cable for short circuit
RO/BI safety relay:
- pin 2/A2 of ECM to pin 2/E1 of
ECM
Ok
Proceed with test 5
Short circuit
Locate and repair the cables fault, proceed
with test 5
3) Check the continuity of the cable:
blue/green from petrol pump relay:
- pin 1/H1 to pin 2 of fuel pump
- pin 1 of fuel pump + 12 vDC with
ignition key in position on
Ok
Proceed with test 4
Open circuit
RESULT
PRECAUTION
LOCATION TEST
FAULT CODE
P1231
Open or short circuit to the mass
Check if the pump activates briefly when ignition
is activated.
Ensure that the pump connector is inserted
correctly.
Disconnect the ECM and proceed with the
location 1 test.
P1232
Short circuit to positive (+) pole
battery
Disconnect the fuel pump and proceed with
the location 4 test.
POSSIBLE CAUSE
PRECAUTION
FUEL PUMP -WALBRO ECU 1
N
NOTE
Another possible cause of the malfunctioning of the TPS/AIR TEMPERATURE/H O TEMPERATURE sensors may be the
absence of 5 Vdc power supply.
Check as follows:
Disconnect AIR TEMPERATURE/H O TEMPERATURE/TPS according to the anomaly encountered and check by turning
the board and using the volthmmeter that:
• on pin 2 of AIR TEMPERATURE connector (or on Pin 1/C5 of ECU) there is a voltage of between 4.5 ~ 5.5 Vdc
• on pin 2 of ENGINE TEMPERATURE (or on pin 1/C6 of ECU)
• on pin 1 of TPS command (or on pin 1/B5 of ECU)
2
ELEC
2
Содержание 2009 TREK1130
