Benelli 2009 TREK1130, Руководство по ремонту

Страница: 103 / 582

3 46
ENGINE/COOLING LIQUID
CHK
ADJ
WARNING
• The cooling liquid top-up must always be carried
out with a cold engine. Never attempt to remove
the radiator cap when the engine is hot to avoid
the risk of burns.
The circuit is pressurised.
• If the cooling liquid should come into contact with
the eyes, accurately rinse them with water and
contact a doctor.
• If the cooling liquid comes into contact with
clothing, immediately remove the liquid using
water and soap.
• In case of swallowing the cooling liquid, force
vomiting and immediately contact a doctor.
• In certain conditions, the ethylene glycol
contained in the cooling liquid is flammable and
its flame is invisible.
Avoid the cooling liquid coming into contact with
hot parts, in that the consequent fuelling of the
ethylene glycol might expose the operator to risks
of burns.
ATTENTION
• By adding water instead of cooling liquid, the
percentage of anti-freeze contained in the cooling
liquid decreases.
If water is used instead of cooling liquid check,
and eventually correct, the concentration of anti-
freeze in the liquid.
• Add only distilled water. However, soft water can
be used if distilled water is not available.
• If the cooling liquid comes into contact with a
painted surface, immediately wash it using water.
• Never mix different types of anti-freeze.
9 Check:
• the cooling liquid level
using the expansion vessel .
Bring the reference level between MIN and MAX.
9
E
10 Install:
• the radiator cap
E