Benelli 2009 TREK1130 Скачать руководство пользователя

Страница: 575 / 582

MAINTENANCE WARNINGS

CONNECTORS

• When connecting a connector, push until a trigger is

heard.

• Check whether the connector is corroded or dirty

and if its cover is broken.

ELECTRIC PLANT

FUSES

• When a fuse triggers, investigate the cause, repair

and, therefore, replace the fuse.

• Do not use a fuse with a different capacity from the

original.

• Do not use a wire or another replaced for the fuse.

When checking the parts, carefully follow the control

instructions.

The non compliance with the correct procedure can

cause serious damages.

COUPLERS

• With a lock type coupler, release the lock before

disconnecting it and push all the way when

connecting it.

• When connecting the coupler, ensure to grip the

coupler body and not to pull the wires.

• Check whether the terminals of the coupler are loose

or bent.

• Check whether the terminals are corroded or dirty.

PARTS TO SEMI-CONDUCTORS

ELEC

Trigger

Incorrect

ATTENTION

Careful not to drop the parts with an ECU type

incorporated semi-conductor.

Содержание 2009 TREK1130







































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2009 TREK1130

Отзывы:

Похожие инструкции для 2009 TREK1130

Бренды по названию

Популярные бренды

Benelli 2009 TREK1130, Руководство по ремонту

Результаты поиска

Содержание 2009 TREK1130

Отзывы:

Похожие инструкции для 2009 TREK1130

Бренды по названию

Популярные бренды