Benelli 2009 TREK1130, Руководство по ремонту

Страница: 95 / 582

3 38
To top-up with engine oil loosen:
• the oil cap with the engine off
Pour an amount of recommended oil until half the
inspection hole between the MAX and MIN reference
is reached.
4
Tighten:
• the oil cap
5
NOTE:
The engine contains approx. 3.5 litres of oil.
Use oil with API-SJ classification and SAE 10W/50
viscosity.
NOTE:
To check the engine oil level again, start the
engine, leave it to warm up for a few minutes then
turn it off.
Wait a few minutes for the oil to flow downwards.
ENGINE/ENGINE OIL
CHK
ADJ
4
ATTENTION
• Given that the engine oil also lubricates the clutch,
if of unsuitable type or if containing additives, it
may cause the sliding of the clutch.
Therefore, we recommend not adding chemical
additives and not using oil different to that shown
in the technical specifications table of the engine.
See "ROUTINE INSPECTIONS AND ADJUSTMENTS
2.2" paragraph.
• Avoid the entering of foreign bodies inside the
base.
The new or exhaust engine oil can be dangerous.
In fact, swallowing it can be toxic for persons and
domestic animals. In case of swallowing,
immediately call the doctor and do not force
vomiting in order to avoid inhaling the product in
the lungs. Brief contact with the engine oil can
irritate the skin.
Keep the engine oil away from the reach of
children and domestic animals.
Wear clothing with long sleeves and waterproof
gloves every time engine oil top-up is carried out.
If the engine oil comes into contact with the skin
wash with soap and water.
Recycle or dispose of the exhaust engine oil
correctly.
•
•
•
•
•