Bender ATICS-2-63A-DIO, Руководство пользователя

Страница: 40 / 104

Commissioning, settings and testing
40 ATICS-DIO_D00080_01_M_XXEN/04.2015
5.1.1 Configure MK… resp. TM…
MK… resp. TM… must display at least the following faults detected by the ATICS®:

Failure Line 1, failure Line 2

Device error, device failure ATICS®

Failure of the other MK… or TM…

Device error with complete text or error code
5.1.2 ATICS-2-DIO: Messages on the BMS bus (channel use)
* Message dependent on the parameter assignment in the "Settings menu 1: Changeover" -> "System"
(for details see "Settings menu 1: Changeover" on page 67)
** Message dependent on the input parameter assignment (for details see "Messages from digital in-
puts" on page 42)
Configure MK… or TM… in a meaningful way
In addition to the alarm, also configure a brief message of what to do or who to
notify. Examples:
- Failure Line 1. Call Building Services Tel. -123.
BMS
chan
nel
Entry in the menu
1.Alarm/meas.
values
Description
Operation
al
status
messages
Alarm
message
Error
1 1. Line 1: 228V Line 1 Voltage Voltage* ---
2 2. Line 2: 183V Line 2 Voltage Voltage* ---
3 3. Position:1 Switch position 0, 1, 2 --- ---
4 4. t(2->1):--
or
SwitchBackLock Return transfer
delay time is ena-
bled, counting
backwards or
SwitchBackLock Seconds --- ---
5 5. Automatic mode Manual/automatic --- Manual
mode ---
6 6. Status Device error --- Errorcode (see
"chapter 8.1.2")
7 7. I(3):35A Load current
TN system Current Current Connection fault
transformer
8 8. Digital Input: -- Digital Input --- Alarm
code** ---
9 9. Digital Input: -- Digital Input --- Alarm
code** ---
10 10. Digital Input: -- Digital Input --- Alarm
code** ---
11 11. Digital Input: -- Digital Input --- Alarm
code** ---
12 No function