Belden Grass Valley KMX-3921, Инструкция по установке и обслуживанию

Страница: 63 / 156

63
KMX-3921
Installation & Service Manual
From peripheral devices to multiviewer
The following ports must be open on peripheral devices (e.g., router controllers):
Router drivers also use default ports:
Between multiviewer and SNMP managers
b.Configurable.
Port Transport Notes
2000 TCP Used to control the multiviewer’s internal router via the SAM (Snell/Pro-
Bel) SW-P-02 protocol.
4381 TCP Used to control the multiviewer’s internal router via the Nevion
(Network) protocol.
5194 TCP Used to control the multiviewer’s internal router via the NVEP Router
(NP0016) protocol.
14000 TCP Used to control the multiviewer’s internal router via the SAM (Snell/Pro-
Bel) SW-P-08 protocol.
Port Driver Transport Notes
4000 ETL TCP
12345 GVG 7000 Native TCP
9193 NVEP NV9000 (NP0017) TCP
4381 VikinX Modular TCP
9100 Quintech TCP
12345 Sony HKSPC TCP GVGNP Emulator
5001 Utah RCP-3 TCP SC-4 Ethernet
2000 SAM (Snell/Pro-Bel) SW-P-02 TCP
14000 SAM (Snell/Pro-Bel) SW-P-08 TCP
Note:
This is configurable in XEdit—you can choose any UDP or TCP/IP port
to use for communications between the multiviewer and an external router.
Port Used for Transport Notes
161 SNMP UDP Used for SNMP (Simple Network Management Protocol)
communications between external SNMP managers and a
multiviewer (e.g., sending get, get-next, and set messages
to a multiviewer’s SNMP agent, and receiving the response).