Belden Grass Valley KMX-3921, Инструкция по установке и обслуживанию

Страница: 51 / 156

51
Frame Operation and IP Network Setup
This chapter shows the multiviewer interfaces, explains the local operations that can be
performed, and it explains how to implement IP network connectivity with the multiviewer.
A KMX-3921 multiviewer system can be controlled in the following ways:
• In the housing frame, the card-edge LEDs can be enabled to allow you to monitor the
KMX-3921 card input’s operating status (see Card Interface and Troubleshooting , on
page 52), or use the CPU-ETH3 local control panel and its buttons to navigate menus
and adjust parameter values (see
Using the Frame Control Panel , on page 53).
• The loading and management of layouts is handled through XEdit, accessed through
an Ethernet connection.
• Grass Valley’s iControl system can be used to access the card’s operating parameters
from a remote computer, using a convenient graphical user interface (see Remote
Control Using iControl , on page 98).
• A GPI interface can be used to remotely control layout selection. See GPI-1501 General
Purpose Interface I/O Module in the Kaleido Software User’s Guide. See Related
Documentation , on page 11.
• The mosaic output resolution of the card can be controlled automatically through the
EDID interface with the display.
• The RCP-200 advanced remote control panel, and the Kaleido-RCP2 control panel allow
you to perform operations on the monitor wall, either by themselves or in association
with an external keyboard and a mouse. Refer to the RCP-200, Kaleido-RCP2, and
Kaleido Software documentation. See
Related Documentation , on page 11.
• The KMX-3921 multiviewer can be controlled as a router by router control systems
which can trigger actions on this multiviewer. See the Routers & Kaleido Multiviewer
chapter in the Kaleido Software User’s Guide. See Related Documentation , on page 11.