Belden Grass Valley KMX-3921, Инструкция по установке и обслуживанию

Страница: 121 / 156

121
KMX-3921
Installation & Service Manual
Enabling Options
To enable options on a multiviewer
1 Obtain a license key from Grass Valley.
2 Open XAdmin.
KMX-3921 output options
Option Part Number Feature Notes
Additional
Head
Activation KMX-3921-OPT-OP2 Additional head
output enable license.
In a multi-card system,
if a card
does not have
this option enabled,
then the only available
multiviewer output is
MV OUT A1 (MV OUT 1,
in the case of a
KMX-3921 9
× 2
system) for that card.
There is no video
output to the
remaining heads.
For more information
about the rear panel
nomenclature, see
Multiviewer SFP
Module Mosaic Output
to Display Input Cable
Connections
, on
page 42.
One additional head output
option key is needed per card.
• If this option is not enabled on
all cards, the system supports
a single SFP TX module in
card A:
• Single fiber
• Single DIN
• HDMI
• If this option is enabled, the
system also supports the
following module
combinations, in each of
card A and card B (if present):
• Two dual TX modules
• Two single TX modules
• One single TX, and one dual
TX (in any order)
For more information about the
location of card A and B in the
frame, see
Installation of the
KMX-3921 in a Densité 3+
Frame
, on page 30.
Display
90-Degree
Rotation KMX-3921-OPT-ROT Display rotation
license One Display 90-Degree Rotation
option key is needed per card.