Belden Grass Valley KMX-3921, Инструкция по установке и обслуживанию

Страница: 103 / 156

103
KMX-3921
Installation & Service Manual
Factory Panel
Use this panel to revert a card’s configuration settings back to their factory-default state.
Set the checkbox for the configuration types you want to reset to their factory-default state
and click
Load Factory .
Card Alarms only are reset to factory values; iControl Alarms and GSM alarms are not reset.
With reference to the Alarm Configuration panel, this is shown below.
Resetting a KMX-3921 Card to its Factory-Default Settings
To reset a KMX-3921 card’s settings to their factory-default values
1 Open iControl Solo (or iControl Navigator, if you have an iControl application server),
and locate the control panel for the KMX-3921 card whose settings you want to reset,
based on the slot number, and the Densité 3+ FR1 / Densité 3+ FR4 frame’s name (refer
to the iControl Solo User Guide, or to the iControl User Guide, for more information).
2 Open the KMX-3921 control panel.
Configuration Type
Checkbox
Description
Card Parameters Resets the card’s configuration parameters to
their factory-default
values, except for alarm and network configuration parameters.
Card Alarms Resets the card’s alarm configuration parameters to their factory-
default values. See below.
Network Settings Resets the card’s network configuration parameters to
their factory-
default values.
Yes No No Alarms reset to factory-default
by clicking
Load Factory?