Appendix
Ⅳ
Make Special Multi-Sequin Design
If there are two sequin delivery devices A and B, and A design
document uses 3MM sequin and 5MM, the design data base should contain
3MM-A base, 5MM-B base, and 5MM-AB base. While the other design
uses 4MM and 6.75MM, then the design data base should contain 4MM-A,
6.75MM-B and 6.75MM-AB.
If there are three sequin delivery devices A, B and C, and one design
document uses 3MM, 4MM and 6.75MM, the design data base should
contain 3MM-A base, 4MM-B base, 4MM-AB base, 6.75MM-C base,
6.75MM-AC base, 6.75MM-BC base and 6.75MM-ABC base. While the
other design data base uses 3MM, 6.75MM and 9MM, the design data base
should contain 3MM-A base, 6.75MM-B base, 6.75MM-AB base, 9-C base,
9-AC base, 9-BC base and 9-ABC base.
Other sequin design data bases are formed in the same principle.
The alternative sequin design data base should combine single and
overlap sequins. For instance, 3MM-A sequin base and 4MM-AB sequin
base can form alternate sequin of 3MM-A & 4MM-AB, which achieves
embroidery effect of A, AB, A, AB…
7
、
Turn normal sequin design to Dahao special sequin design
According to the above rules, we just need insert some jump stitch after
“sequin code” , so that we can change the original sequin code to special
“multi-sequin code”.
1)
If you want to change the first sequin code to A+B sequin code, you
need to locate to that stitch first
（
its character is to put down the
sequin
）
.
2)
Right click “insert jump stitch” twice to insert two jump stitches after
the original sequin code.
176 BECS- D56 computerized embroidery machine owner’s manual
Содержание BECS-D56
Страница 2: ......
