Beckman Coulter Power Express Aliquot, Инструкция по эксплуатации

Страница: 34 / 122

Figure 2.2 Inside of Label Printer (with door open)
1. Label Intake Slot
2. Label Guides
3. Print-Head
4. Label Sensor
5. Label Roller
5
Remove the U-clamp from the uptake spindle and discard the used label paper.
6
Put the new roll of labels on the front spindle with the black marking lines at the
bottom. For ease of installation, remove seven labels from the start of the roll.
7
Insert the start of the new roll of labels through the label paper intake slot at the front
of the printer. Route the label paper under the label guides, out the back of the printer,
around the white guide post, and over to the uptake spindle. Refer to
Figure 2.3 Label
Printer with Roll of Labels .
Power Express Aliquot Module Procedures
Replace the Roll of Labels in the Labeler
2-4
B31449AE