Beckman Coulter Power Express Aliquot, Инструкция по эксплуатации

Страница: 42 / 122

Error Recovery General Information
When an error condition occurs, the system generates an error message, sounds an alarm
and flashes a warning beacon. Error messages are shown on the control panel of the
module where the error has occurred, and in the System Error Log. The System Error Log
automatically stores the 2000 most recent error messages in the order they occurred.
Aliquot Module Function Codes
The procedure to recover from an error condition can require that you enter one or more
function codes into one of the control panels on the Power Express or clearing an error
condition on a connected instrument.
The following table lists the Power Express module function codes by associated module,
with descriptions of the action triggered by each function code. You must place a module in
Manual mode to enter function codes.
Module Function Code Definitions Table 3.1
Unit Function
Code
Definition
Level
Detector
01 Lane through (Bypass)
82 Set Load Timeout Parameter to start the measurement of red cell layer.
91 Collect all sample tubes located downstream from BR01
Labeler 01 Lane through (Bypass)
91 Collect all sample tubes located downstream from BR02
Aliquotter 01 Lane through (Bypass)
31 Move tip nozzles toward the front of the module
32 Move tip nozzles toward the back of the module
Error Recovery Procedures
Error Recovery General Information
3-2
B31449AE