Beckman Coulter Power Express Aliquot, Инструкция по эксплуатации

Страница: 31 / 122

CHAPTER 2
Power Express Aliquot Module Procedures
Introduction
This chapter contains operational procedures for the Aliquot module.
Warning
Always operate the system with all shields and doors in position and secured to avoid
injury.
Perform system operations with caution.
Wear Personal Protective Equipment (PPE) such as gloves, eye shields, and lab coats.
Wash hands thoroughly after contact with sample media and all maintenance
activities.
Observe all laboratory policies and procedures related to the handling of
biohazardous materials.
Refer to the applicable sources (such as Material Safety Data Sheets) for specific
hazard information.
Set Load Timeout for the Level Detector
The Level Detector loads and measures up to five primary sample tubes at a time. The Load
Timeout parameter is the period of time (in seconds) that the Level Detector waits before it
processes less than a full load of five primary sample tubes.
Follow the procedure below to set the Load Timeout.
1
Select Manual on the control panel.
2
Select OK to stop the Level Detector.
3
Select Maintenance on the control panel.
4
Select the number field to display the onscreen keyboard.
5
Enter 82 from the onscreen keyboard and select Enter twice to enter the edit mode.
6
Enter the new setting in 10 second increments (for example, enter 6 for 60 seconds)
and select Enter twice to return to the Mode-Setting screen. Default setting is 6 for
60 seconds.
7
Select Exit to display the Status/Mode screen.
8
Select Auto and OK to resume operation.
B31449AE
2-1