Baumuller b maXX BMC-M-SAF-02, Руководство по эксплуатации

Страница: 46 / 120

Requirements on the personnel conducting the work
Operation Manual b maXX safe PLC BMC-M-SAF-02
Document no.: 5.07020.04 Baumüller Nürnberg GmbH
46
of 118
9.2
h
Be aware of all areas of the b maXX System which could pose a danger to you during
the assembly process.
The following illustration provides an overview of the danger zones present on the mod-
ule.
Figure 7: Danger zones of the BMC-M-SAF-02 with memory card
Dual-channel safety PLC
9.2 Requirements on the personnel conducting the work
Qualified personnel refers to persons who have been authorized by the parties in charge
of the plant safety to conduct the necessary activities applicable and are able to detect
and avail potential dangers due to their training, experience, instruction and knowledge
of the relevant standards and provisions, accident prevention regulations and operating
conditions. Example of the qualifications required for work with the unit include:
m
Training or instruction in accordance with the safety technology standards in the main-
tenance and use of suitable safety equipment.
SAF-02
S1
H1
H5
H9
H4
H8
H12
S2
012
34
5
7
6
89AB
C
D
E F
X1
X2
5
9
6
1
5
9
6
1
BAUMULLER BAUMULLER BAUMULLER
CFI-01
H1 H4
S2
X1
012
34
5
7
6
89AB
C
D E
F
H9
S1
H5 H8
BAUMULLER
H1 H4
H5
S1
DANGER!
Life-threatening danger from electrical current!
The device and surrounding area in the electrical cabinet can carry life-threatening
voltages.
Therefore:
m
Make sure that power to the device and surrounding area is shut off before begin-
ning work.
m
Follow the applicable safety regulations when handling devices carrying high volt-
ages.
m
Ensure that this module is assembled and installed exclusively by qualified person-
nel.