Baumuller b maXX BMC-M-SAF-02, Руководство по эксплуатации

Страница: 114 / 120

Definition of the term Declaration of Conformity
Operation Manual b maXX safe PLC BMC-M-SAF-02
Document no.: 5.07020.04 Baumüller Nürnberg GmbH
114
of 118
The electrical safety and function of the control system will be checked with the harmo-
nized standard EN 61131-2.
With specified application of this Baumüller equipment in your machinery, you can act on
the assumption that the equipment satisfies the requirements of 2006/42/EC (machinery
directive).
Therefore the equipment is developed and constructed in such a way, that the require-
ments of the harmonized standard EN 60204-1 can be met by the electrical installation.
Control systems supplied by the Baumüller Nürnberg GmbH satisfy the requirements of
2004/108/EC (EMC Directive) by satisfying the requirements of the harmonized standard
EN 61131-2.
To enable you to market your machine within the EU, you must be in possession of the
following:
m
Conformity mark (CE mark)
m
Declaration(s) of Conformity regarding the directive(s) relevant to the machine
E.3 Definition of the term Declaration of Conformity
A Declaration of Conformity as defined by this operating instruction is a declaration that
the electrical equipment brought into circulation conforms to all the relevant fundamental
safety and health requirements.
By issuing the Declaration of Conformity in this section the Baumüller Nürnberg GmbH
declares that the equipment conforms to the relevant fundamental safety and health re-
quirements resulting from the directives and standards which are listed in the Declaration
of Conformity.
E.4 Declaration of Conformity