Barudan BEXS, Инструкция по эксплуатации

Страница: 124 / 233

８‐１３
11. Automending
Automending is the Stitch back feature for one or more appointed sewing heads. In other words,
not all the sewing heads, like the Stitch back feature.
Press and hold the Automending switch on the Tension Box for the appointed head, while the
machine is stopped. The Pantograph will back up stitch by stitch, until the Automending
button is released. The appointed sewing head or heads that have the Automending feature
active, will have the Red LED on the Tension Box lit.
Use the Start switch to sew over the backed up stitching on the appointed sewing head(s) only.
1. Stop the machine with the Stop switch.
2. Press and hold the Automending switch on the Tension Box on the sewing head or heads
that need stitches repaired and sewn over. Release the Automending switch as the
Pantograph reaches the desired stitch position.
3. Push the start switch to start sewing automend stitches on the appointed head(s).
4. MC (Machine Condition) settings for Automending
#12 : Overlap – Overlap stitches after Automending, Default : 4
#13 : Auto Start – The automatic start after Automending, Default : Inactive
The Auto start option determines whether the machine stops after Automending or not.
When it stops: The machine stops where the Automending ends and Stitches back
automatically as set by the Overlap parameter.
When it continues: The machine continues sewing and engages all of the sewing heads at
the end of Automending.
* To Automend back on many stitches or to Automend on more than one head, press the
Automend button on the appointed head(s) so the Red LED is lit on that head. Then
press and hold the Stop switch to back up stitch by stitch. Backing up past 30 stitches
will continue to back up when the stop switch is released. Press the start switch to stop
backing up.