5. MAINTENANCE
WARNING: The machine is not protected against water jets, therefore do not use pressure cleaning
systems. Contact your cleaning products retailer for detailed instructions on the methods and products
to use for periodic sanitizing of your appliance. DO NOT use bleach or chlorine-based detergents for
cleaning the appliance.
5.1 Regular Maintenance
In order to ensure perfect performance, the appliance must be completely cleaned at least once a day in the following way:
• Turn the switch to 0 (see chap.
3. CONTROL PANEL AND RELATIVE SYMBOLS
).
• Turn off the main wall switch.
• Turn off the water tap.
• Remove the overflow tube to empty the water. For appliances provided with emptying pump follow the indications as
described on paragraph
4.4 Drain pump system (optional)
.
• Remove the filter and clean it with a brush under running water.
• Remove the rotors by loosening the fixing screws, and thoroughly clean the nozzles and cleaning and rinsing arms under
running water
• If presents, remove the surface filters and clean it with a brush under running water (see Pict. 4).
• Refit all the parts and arrange the impellers in their seats, securing them with the relative fixing screw. Take extreme care to
re-assemble the nozzles in the right position (open and / or closed nozzles) and that the arms are installed with the right axial
angle.
• Clean the tub thoroughly using specific products.
• At the end of the day, it is advisable to leave the dishwasher door open.
Pict. 4
Automatic cycle of machine self-cleaning/rinsing:
• The machine should be in stand-by mode (red-lighted indicator
F4
), remove the overflow pipe and close the door.
• Push the button START
E
for 5 seconds. An automatic cycle of 15 seconds will start, after this the machine will be in stand-by
mode.
• When flashing the indicators
F16
-
F3
-
F9
means that the tank is not empty.
• When
displaying
door
means that the door is open.
S
!
1
3
2
4
S
!
1
3
2
4
S
!
1
3
2
4
• Turn off the water tap.
• Turned off the machine by switching the main power switch OFF.
Note: It is advisable to replace the tub water by refilling the tub at least every 20 wash cycles, or twice
a day. Do not use metal brushes or corrosive products which can damage the machine.
page 19
EN
