4. OPERATION
• Check that the filter is correctly fitted in its seat (Pict. 1 - Pict. 2).
• The filter must be cleaned after every 20 wash cycles and whenever necessary.
•
DO NOT use the appliance without the filter..
• Insert the overflow tube in the special seat inside the tub (Pict. 1 -Pict. 2 ).
• Close the dishwasher door.
• Insert the special rinse aid dispenser tube in the liquid container and check that the quantity of additive is sufficient for daily
use (see paragr.
4.3 Use of rinse aid
).
• Open the water valve.
Pict. 1
Pict. 2
• Turn the main power switch ON. The machine is on STAND-BY mode (indicator
F4
ON).
• Turn the button
A
. The power-on of the machine will be displayed by the indicator
F4
switching OFF and by the indicators
F15
and
F10
and by the one of the washing cycles switching ON.
• Make sure that the overflow pipe is correctly inserted and that the door is shut. The machine will automatically start filling the
sump. The indicators
F16
,
F2
and the scrolling bar
F1
switch on.
• Then, when the sump is full, the push button START
E
swtich on and the heating step will start.
• Indicator
F5
switches on when the washing and rinsing water temperature is reached.
• The
indicators
F15
and
F10
show the tank and boiler temperatures, respectively.
S
!
1
3
2
4
S
!
1
3
2
4
• Insert the rack filled with dishes to wash. The objects must be correctly placed in the rack.
• Select the wanted washing cycle (
1 - 2 - 3 - 4
) by pushing the button START
E
; after a few seconds (about 5 seconds) the
indicators
F14, F13, F12, F11
will start scrolling. Release the button when the cycle light indicator desired is ON. (see chap.
4. OPERATION
)
• Before starting the wash-cycle, in absence of an automatic dosing system, put the detergent in the sump. When the
temperature indicator
F5
will turn ON, press the START
E
button for at least a second. The beginning of the cycle is indicated
by the flashing of the selected cycle indicator, by the increasing of the brightness of the button START
E
and by the progress
of the scroll bar
F1
.
• At the end of the washing cycle, a hot rinse cycle will take place.
S
!
1
3
2
4
S
!
1
3
2
4
page 14
EN