Bartec HYGROPHIL H 4230-10 A Series, Руководство по эксплуатации

Страница: 66 / 122

Programming
60
Operating Instructions HYGROPHIL® H 4230-10 Serie A BA 030520
5 Programming
You can program HYGROPHIL 4230 to prepare it for use in your existing
measurement and operation conditions.
An overview of the menu structure in programming mode can be found on
page 62.
5.1 General notes
5.1.1 Interaction
During programming, the user interacts with the equipment by answering
questions with alternative answers. In various menus, the character string
1/0 appears after the question. Entering
1
means „yes“ and entering
0
means „no“.
Pressing the
ENTER
key at this point has the effect that no changes are
made in the menu and you are taken to the next menu.
You also use the
1
and
0
keys to choose between two options. The option
currently selected is highlighted. If you press the
ENTER
key this option is
confirmed without change and the next menu appears.
If you are requested to enter measurement variable designations (when
assigning the measurand or operand to the analogue output), you must
press the appropriate measurement variable key.
If you need to enter numerical values (such as limits), you can do so using
the keyboard and confirm by pressing the
ENTER
key. The previous value is
deleted as soon as you press a key.
If you do not wish to change the value that has been set, confirm it by
pressing the
ENTER
key.
Incorrect numerical entries can be deleted one character at a time using the
CLEAR
key.
If the cursor is positioned over the first character of an input field for
numerical values (when you open the input field), you can use the
CLEAR
key to delete the entire entry. The entire entry is deleted automatically as
soon as you press a key for entering a new value.