Bartec HYGROPHIL H 4230-10 A Series, Руководство по эксплуатации

Страница: 54 / 122

Installation
48
Operating Instructions HYGROPHIL® H 4230-10 Serie A BA 030520
3.7 Filling the water storage tank
In order to operate HYGROPHIL
®
H 4230, you must pour demineralised
water (extracted using the ion exchange procedure) or boiler feed water into
the storage tank. It does not have to be distilled water.
For each litre of water, add 5...10 ml of surfactant. The scope of delivery
includes a 1l bottle of surfactant that is combined with a detergent. The task
of the surfactant is to reduce the surface tension of the water in the
measuring cell and support the self-
cleaning effect. Reducing the water’s
surface tension allows the water to flow smoothly out of the measuring cell.
This also has the result that the measurement result is not subject to any
fluctuations due to a periodically rising water level as might be the case if the
tension were not to be reduced.
● Begin by pouring the surfactant into the storage tank.
● Fill the storage tank with 2 litres of demineralised water.
● Position a condensate collector ready to catch the water, which may be
mixed with impurities from the place of measurement.
Note:
In cases in which a particular type of impurity occurs, a detergent other than
the one supplied may be more effective. If required, ask BARTEC for
advice, specifying the type of impurity.
A larger water storage tank is available as an optional accessory. The
content of 11 litres is enough for an operating duration of around 3 weeks.
Under certain conditions, a permanent, constant water supply may be a
good idea.
In order to catch the water
that flows out of the bottom of
the unit during operation you
can screw the supplied hose
connection nipple to the outlet
connection. You can then
connect a 3/8" water hose to
it.
3/8“