Bartec HYGROPHIL H 4230-10 A Series, Руководство по эксплуатации

Страница: 76 / 122

Programming
70
Operating Instructions HYGROPHIL® H 4230-10 Serie A BA 030520
5.2.5 Limit monitoring
For measured values or arithmetic values you can define limits within the
respective scale. If the value exceeds or falls below a defined limit, the
warning relay is activated and the ERROR LED lights up.
0
or
ENTER

Don’t make any changes, quit programming mode
1

Change the programming of the limits
0

Switching OFF the limit monitoring, quit programming
mode
1

Switching ON the limit monitoring
ENTER

Don’t make any changes
ENTER

Confirm measurand or operand for defining the limit
ENTER

Don’t make any changes
Define lower limit: enter new value using keyboard,
ENTER
ENTER

Don’t make any changes
Define upper limit: enter new value using keyboard,
ENTER
Once you have finished programming the limits for limit monitoring,
programming mode is also quit and the equipment returns to operating
mode.
SET LIMITS ? 1/0
LIMIT-CONTROL
DT
–> LIMIT
LIMIT-CONTROL
LOW-LIM = 0
LIMIT-CONTROL
UPP-LIM = 100
LIMIT-CONTROL
LIMIT TASK ? 1/0