Setup, Network and Communication Manual ESTM / ESTM-L
17-88C1-*
11-88C1-7D0002
Notice
Technical data subject to change without notice.
No claims for damage arising from alternations, errors or misprints shall be allowed.
Page 7 / 35
4. Bartec Trace Command
General
4.1 General
The BARTEC TRACE COMAND the software-tool
to set up and monitor all ESTM/ESTM-L devices
with an android based handheld device.
Your local BARTEC reprehensive will provide the
installation file and a suitable handheld device.
4.2 Installation
DANGER When using the BARTEC TRACE COMAND,
make sure that the handheld device with the software
installed on is suitable for the operating environment.
Your local BARTEC reprehensive will help you to find a
suitable device.
Preparing for Installation
Transfer
the
*.apk
file
to
your
android
device
(USB/WIFI/Bluetooth/memory card etc. can be used)
Allow installation from unknown source
This setting can be found in the device settings of your Android
System at the menu
“Security”. Depending on the Version of your
Android it might look different.
Instalation from *.apk file
Open the folder at your Android device where you stored the *.apk.
Klick on the File to start the Installation
Allow the App to access Bluetooth and other device functions by
pressing INSTALL