Setup, Network and Communication Manual ESTM / ESTM-L
17-88C1-*
11-88C1-7D0002
Notice
Technical data subject to change without notice.
No claims for damage arising from alternations, errors or misprints shall be allowed.
Page 6 / 35
3. General information
3.1 About this manual
This manual is applicable for firmware version 3.4.6
3.2 Bluetooth ID
The serial number of the ESTM/ESTM-L is used to identify the
device when connecting to Bluetooth. The serial number is
equivalent to the MAC-Address of the Bluetooth-Module.
3.3 Factory set default device-
password
ESTM-L
„Device pin (digits)“
This password should be changed and only authorised
persons should be supposed to know. Otherwise some
unauthorized persons are able to change all settings.
What might interrupted our processes or it can lead to a
damage of system or equipment
Password change see: 4.8.8 System Data
3.4 Temporary Pin
Temporary Pin is 3 digit Password that is created by the ESTM /
ESTM-L and shown on the display of the device. The hexadecimal
numeric code is used for this password. That means the numbers
from
0-9
and the charters
A-F
are used. This key is re-created each
time a change is requested to the device.
That password will make sure that you have selected the correct
device. And it will help to prevent unauthorised access to the
System.
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
A
C
E
F