
Setup, Network and Communication Manual ESTM / ESTM-L
17-88C1-*
11-88C1-7D0002
Notice
Technical data subject to change without notice.
No claims for damage arising from alternations, errors or misprints shall be allowed.
Page 25 / 35
4.8.8
System Data
Here you will find all important information about the device. These
can be helpful in case of troubleshooting and maintenance.
WARNING If you start the reboot function, the device will
shut down and restart. The load circuit is disconnected
and
the
fault
contact
opens.
Furthermore,
all
communication channels will be interrupted. There is no
access to the unit until the respective connection is re-
established.
This password should be changed and only authorised
persons should be supposed to know. Otherwise some
unauthorized persons are abled to change all settings.
What might interrupted our processes or it can lead to a
damage of system or equipment
Function
Description
action / - effects on / valid values ranges
Bluetooth Name
Can be selected as required e.g. heating circuit
number. It should be individual.
Max length: 30 characters
detailed information see following pages
Modbus Address
Bus address of the device
0= Modbus switched off
1-255 = modbus address
detailed information see following pages
Password
Secures access to store configuration changes
Exact 6 characters
detailed information see following pages
Device Serial
Individual identification number of the device and
the MAC address of the Bluetooth module.
Hexadecimal: e.g. 5C:B6:CC:83:8F:45
see also: 3.2 Bluetooth ID
Device NAME / TYPE
Type of the device
ESTM or ESTM-L
Hardware Revision
Version of the Hardware
Firmware Revision
Software version of the device
Also shown on start up at the display
Actual system time
The Operating time is an Operating time counter,
this serves to improve the traceability of events.
System-Runtime of the device since first power
on.
Reboot
Restarts the Device (all communication interfaces
will be interrupted)
On local display the device show a countdown
from 3 to 0. Then device is shut down and
restarted. Detailed information see following
pages.
Factory reset
All settings including device Password is reset to
factory settings.
detailed information see following pages