Bartec ESTM, Руководство пользователя, Страница: 31 / 35

Setup, Network and Communication Manual ESTM / ESTM-L
17-88C1-*
11-88C1-7D0002 Notice Technical data subject to change without notice.
No claims for damage arising from alternations, errors or misprints shall be allowed.
Page 31 / 35
5.4.3 Input Registers
ModBus Register
(DEC) Data
Type r/w description intern alarm contact action range / additional
1 int 16 r Sensor 1 actual value
fault indication: 999
2 int 16 r Sensor 2 actual value
3 int 16 r Limiter actual value
4 int 16 r Limiter set point value
5 int 16 r Process control value
15 uint 16 r Load current value 0-300 [0-30,0A]
16 uint 16 r Leakage current value 0-300 [0-300mA]
22 uint 16 r Load voltage value [V]
48 uint 32 r actual Operating time [min]
70 uint 16 r Low fault byte value (16bit)
0 Limiter fault
1 Limiter tripped
2 Alarm sensor 1 above limiter set point
3 Min alarm load current OFF=0
4 Max alarm load current OFF=300
5 Max alarm leakage current OFF=300
6 Max alarm sensor 1
7 Max alarm sensor 2
8 Alarm sensor 2 above limiter set point
9 Sensor 1 fault high
10 Sensor 2 fault high
11 Sensor limiter fault high
12 Coding element fault high
13 Internal hardware fault bit 13
14 NOTUSED
15 Software-Limiter tripped (available since
firmware version 4.0.0)
71 uint 16 r High fault byte value (16bit)
0 NOTUSED
1 Min alarm sensor 1
2 Min alarm sensor 2
3 NOTUSED
4 NOTUSED
5 NOTUSED
6 Internal power circuit hotspot 125°C
7 Internal power circuit hotspot 135°C
8 Internal hardware fault bit 24
9 Internal hardware fault bit 25
10 Internal hardware fault bit 26
11 Sensor 1 fault low
12 Sensor 2 fault low
13 Sensor limiter fault low
14 Coding element fault low
15 NOTUSED