Setup, Network and Communication Manual ESTM / ESTM-L
17-88C1-*
11-88C1-7D0002
Notice
Technical data subject to change without notice.
No claims for damage arising from alternations, errors or misprints shall be allowed.
Page 5 / 35
2. Safety
2.1 Safety marking
Particularly important points in these instructions are marked with
a warning message:
DANGER draws attention to a danger which will lead to
death or serious injury if not avoided.
WARNING draws attention to a danger which can lead to
death or serious injury if not avoided.
CAUTION draws attention to a danger which can lead to
minor or moderate injury if not avoided.
NOTICE
Important instructions and information on effective,
economical & environmentally compatible handling.
2.2 Safety Instructions
The safety instructions given in this clause must be carefully
observed.
DANGER When using the BARTEC TRACE COMAND,
make sure that the handheld device with the software
installed on is suitable for the operating environment.
Your local BARTEC reprehensive will help you to find a
suitable device.
If the BARTEC Trace Command is incorrectly executed,
the settings of the connected ESTM/ESTM-L can be
changed, affecting the operational reliability of the entire
heating system! Only trained technical personnel may run
the program in online mode.
WARNING this manual is only an additional information
for all technical details please observe the Installation
instructions
NOTICE
Disclaimer
BARTEC GmbH shall not assume any liability for damage
resulting from installation and use of the BARTEC Trace
Command, and in particular no liability for personal injury
or damage to property and pecuniary loss related directly
or indirectly to use of the software.