
Setup, Network and Communication Manual ESTM / ESTM-L
17-88C1-*
11-88C1-7D0002
Notice
Technical data subject to change without notice.
No claims for damage arising from alternations, errors or misprints shall be allowed.
Page 33 / 35
Device internal status and fault logging of the last conditions
161
uint 32
High fault / Low fault [0]
See below
163
uint 32
High fault / Low fault [1]
165
uint 32
High fault / Low fault [2]
167
uint 32
High fault / Low fault [3]
169
uint 32
High fault / Low fault [4]
171
uint 32
Operating time [0]
See below
[min]
173
uint 32
Operating time [1]
175
uint 32
Operating time [2]
177
uint 32
Operating time [3]
179
uint 32
Operating time [4]
181
uint 16
Status[0]
See below
182
uint 16
Status[1]
183
uint 16
Status[2]
184
uint 16
Status[3]
185
uint 16
Status[4]
200
uint 16
Firmware version
Device internal status and fault logging of the last conditions
The last 5 states of the variables "Low fault byte value", "High fault byte value" and "Status byte" are stored in order to get a review
of the past error states. This is achieved in the variable "High fault / Low fault [0]...[4]" and "Status [0]...[4]".The end number can
also
be
used
to
determine
the
time
of
the
event
"
Operating
time
[0]...[4]".
A new entry will be created if there is a change in Modbus register #70 or #71 (faults) only.